Skip to main content
Inspection outcome
Opened: May 8, 2025 · Closed: October 30, 2025
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations5
Serious+0
Initial penalty$11,065
Current penalty$4,044
Accidents0
Duration175d
Summary

What happened in this inspection

On May 8, 2025, OSHA opened Montana Custom Millwork Co.’s inspection #348235300 at BILLINGS, Montana. The case was administratively closed on October 30, 2025, 175 days after opening.

OSHA cited the employer for 5 violations totaling $4,044 in current penalties — reduced from an initial proposed total of $11,065. All citations were Other-than-serious.

Breakdown by classification
5violations total
Serious5100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

5citations issued
$4,044current penalty
↓ $7,021total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01001
29 CFR 1910.147(c)(4)(i)View full regulation text on OSHA.gov
Initial$2,128
Current$1,064reduced by $1,064
Seriousgravity 1
Citation #01002
29 CFR 1910.219(c)(2)(i)View full regulation text on OSHA.gov
Initial$1,277
Current$639reduced by $638
Seriousgravity 10
Citation #01003A
29 CFR 1910.219(d)(1)View full regulation text on OSHA.gov
Initial$2,979
Current$1,490reduced by $1,489
Seriousgravity 10
Citation #01003B
29 CFR 1910.219(e)(1)(i)View full regulation text on OSHA.gov
Initial$2,979
Current$0reduced by $2,979
Seriousgravity 5
Citation #01004
29 CFR 1910.303(g)(2)(i)View full regulation text on OSHA.gov
Initial$1,702
Current$851reduced by $851

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 348235300 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Montana Custom Millwork Co.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 348235300 directly: