Skip to main content
Inspection outcome
Opened: May 20, 2020 · Closed: July 23, 2020
Serious citation issued

OSHA cited the employer for at least one Serious violation.

Safety inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations4
Serious+4
Initial penalty$1,875
Current penalty$1,314
Accidents0
Duration64d
Summary

What happened in this inspection

On May 20, 2020, OSHA opened 101526 - Welch Plumbing Incorporated’s inspection #344762752 at FARIBAULT, Minnesota — an establishment in the water & sewer line construction industry. The case was administratively closed on July 23, 2020, 64 days after opening.

OSHA cited the employer for 4 violations totaling $1,314 in current penalties — reduced from an initial proposed total of $1,875. Of those, 4 were classified as Serious or worse.

Breakdown by classification
4violations total
Serious4100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

4citations issued
$1,314current penalty
↓ $561total reduction
Look up on OSHA.gov
Serious
Citation #01001
29 CFR 1926.100(a)View full regulation text on OSHA.gov
Initial$225
Current$158reduced by $67
Serious
Citation #01002
29 CFR 1926.652(a)(1)View full regulation text on OSHA.gov
Initial$825
Current$578reduced by $247
Serious
Citation #01003
29 CFR 5207.1000View full regulation text on OSHA.gov
Initial$450
Current$315reduced by $135
Serious
Citation #01004
29 CFR 5207.1000View full regulation text on OSHA.gov
Initial$375
Current$263reduced by $112

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 344762752 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 344762752 directly: