Skip to main content
Inspection outcome
Opened: March 27, 2025 · Closed: May 8, 2025
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations3
Serious+0
Initial penalty$450
Current penalty$450
Accidents0
Duration42d
Summary

What happened in this inspection

On March 27, 2025, OSHA opened 108992 - Pumptec Inc’s inspection #348160128 at ANOKA, Minnesota. The case was administratively closed on May 8, 2025, 42 days after opening.

OSHA cited the employer for 3 violations totaling $450 in current penalties. All citations were Other-than-serious.

Breakdown by classification
3violations total
Other-than-serious3100%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

3citations issued
$450current penalty
Look up on OSHA.gov
Other
Citation #01002
29 CFR 5205.1200View full regulation text on OSHA.gov
Initial$150
Current$150
Other
Citation #01003
29 CFR 5205.1200View full regulation text on OSHA.gov
Initial$150
Current$150

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 348160128 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 348160128 directly: