Skip to main content
Inspection outcome
Opened: July 8, 2021 · Closed: May 25, 2022
Citations issued

OSHA issued one or more Other-than-serious citations.

Health inspection · Complaint · Partial — limited to specific operations or areas

Violations14
Serious+0
Initial penalty$10,600
Current penalty$5,300
Accidents0
Duration321d
Summary

What happened in this inspection

On July 8, 2021, OSHA opened Ac Foundry Incorporated Dba Melling Engineered Aluminum Castings’s inspection #345407852 at BATTLE CREEK, Michigan. The case was administratively closed on May 25, 2022, 321 days after opening.

OSHA cited the employer for 14 violations totaling $5,300 in current penalties — reduced from an initial proposed total of $10,600. All citations were Other-than-serious.

Breakdown by classification
14violations total
Serious14100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

14citations issued
$5,300current penalty
↓ $5,300total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01001A
29 CFR 1910.1053(c)View full regulation text on OSHA.gov
Initial$2,000
Current$1,000reduced by $1,000
Seriousgravity 5
Citation #01001B
29 CFR 1910.1053(g)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01001C
29 CFR 1910.1053(d)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01002A
29 CFR 1910.1053(f)(2)(i)View full regulation text on OSHA.gov
Initial$2,400
Current$1,200reduced by $1,200
Seriousgravity 5
Citation #01002B
29 CFR 1910.1053(e)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01002C
325.52503(1)General Duty Clause or unstructured citation
Initial$0
Current$0
Seriousgravity 5
Citation #01003A
29 CFR 1910.1053(j)(3)(i)View full regulation text on OSHA.gov
Initial$2,400
Current$1,200reduced by $1,200
Seriousgravity 5
Citation #01003B
29 CFR 1910.1053(j)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01003C
29 CFR 1910.1200(e)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01003E
29 CFR 1910.1048(n)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01004
29 CFR 1910.1053(i)(1)(i)View full regulation text on OSHA.gov
Initial$2,000
Current$1,000reduced by $1,000
Seriousgravity 1
Citation #01005
29 CFR 1910.1048(d)(2)View full regulation text on OSHA.gov
Initial$1,800
Current$900reduced by $900

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 345407852 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Ac Foundry Incorporated Dba Melling Engineered Aluminum Castings

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Complaint — an inspection triggered by a worker complaint.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 345407852 directly: