Skip to main content
Inspection outcome
Opened: June 15, 2021 · Closed: December 29, 2021
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Referral · Partial — limited to specific operations or areas

Violations22
Serious+0
Initial penalty$11,200
Current penalty$7,665
Accidents0
Duration197d
Summary

What happened in this inspection

On June 15, 2021, OSHA opened Tcp Reliable Manufacturing, Inc.’s inspection #345363949 at COLUMBIA, Maryland. The case was administratively closed on December 29, 2021, 197 days after opening.

OSHA cited the employer for 22 violations totaling $7,665 in current penalties — reduced from an initial proposed total of $11,200. All citations were Other-than-serious.

Breakdown by classification
22violations total
Serious1568%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious732%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

22citations issued
$7,665current penalty
↓ $3,535total reduction
Look up on OSHA.gov
Seriousgravity 7
Citation #01001A
29 CFR 1910.132(d)(1)View full regulation text on OSHA.gov
Initial$2,450
Current$1,715reduced by $735
Seriousgravity 5
Citation #01001B
29 CFR 1910.133(a)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 7
Citation #01002A
29 CFR 1910.147(c)(4)(i)View full regulation text on OSHA.gov
Initial$2,450
Current$1,715reduced by $735
Seriousgravity 5
Citation #01003
29 CFR 1910.151(c)View full regulation text on OSHA.gov
Initial$1,750
Current$1,050reduced by $700
Seriousgravity 7
Citation #01004A
29 CFR 1910.212(a)(1)View full regulation text on OSHA.gov
Initial$2,450
Current$1,715reduced by $735
Seriousgravity 7
Citation #01004D
29 CFR 1910.219(d)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 6
Citation #01005A
29 CFR 1910.1200(e)(1)View full regulation text on OSHA.gov
Initial$2,100
Current$1,470reduced by $630
Seriousgravity 6
Citation #01005B
29 CFR 1910.1200(g)(8)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 6
Citation #01005C
29 CFR 1910.1200(h)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Othergravity 1
Citation #02001
29 CFR 1910.29(b)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Othergravity 5
Citation #02002
29 CFR 1910.132(d)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Othergravity 1
Citation #02005
29 CFR 1910.178(g)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Othergravity 10
Citation #02006
29 CFR 1910.178(l)(6)View full regulation text on OSHA.gov
Initial$0
Current$0

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 345363949 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Referral — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 345363949 directly: