Skip to main content
Inspection outcome
Opened: April 11, 2023 · Closed: August 4, 2025
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations19
Serious+0
Initial penalty$112,162
Current penalty$45,855
Accidents0
Duration846d
Summary

What happened in this inspection

On April 11, 2023, OSHA opened Dsm Metal Fabrication’s inspection #346624125 at BIDDEFORD, Maine. The case was administratively closed on August 4, 2025, 846 days after opening.

OSHA cited the employer for 19 violations totaling $45,855 in current penalties — reduced from an initial proposed total of $112,162. All citations were Other-than-serious.

Breakdown by classification
19violations total
Repeat15%

A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.

Serious1789%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious15%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

19citations issued
$45,855current penalty
↓ $66,307total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01001
29 CFR 1910.101(b)View full regulation text on OSHA.gov
Initial$7,306
Current$3,653reduced by $3,653
Seriousgravity 5
Citation #01002
29 CFR 1910.107(b)(5)(i)View full regulation text on OSHA.gov
Initial$7,306
Current$3,653reduced by $3,653
Seriousgravity 5
Citation #01003
29 CFR 1910.107(g)(2)View full regulation text on OSHA.gov
Initial$7,306
Current$3,653reduced by $3,653
Seriousgravity 5
Citation #01004A
29 CFR 1910.134(h)(2)(i)View full regulation text on OSHA.gov
Initial$7,306
Current$3,653reduced by $3,653
Seriousgravity 5
Citation #01004B
29 CFR 1910.134(i)(5)(iv)View full regulation text on OSHA.gov
Initial$7,306
Current$0reduced by $7,306
Seriousgravity 5
Citation #01004C
29 CFR 1910.134(k)View full regulation text on OSHA.gov
Initial$7,306
Current$0reduced by $7,306
Seriousgravity 1
Citation #01007
29 CFR 1910.157(e)(2)View full regulation text on OSHA.gov
Initial$4,383
Current$2,192reduced by $2,191
Seriousgravity 1
Citation #01008
29 CFR 1910.178(a)(4)View full regulation text on OSHA.gov
Initial$4,383
Current$2,192reduced by $2,191
Seriousgravity 5
Citation #01009
29 CFR 1910.178(l)(4)(iii)View full regulation text on OSHA.gov
Initial$7,306
Current$3,653reduced by $3,653
Seriousgravity 1
Citation #01010
29 CFR 1910.212(b)View full regulation text on OSHA.gov
Initial$4,383
Current$2,192reduced by $2,191
Seriousgravity 5
Citation #01011A
29 CFR 1910.215(a)(2)View full regulation text on OSHA.gov
Initial$7,306
Current$3,653reduced by $3,653
Seriousgravity 1
Citation #01011B
29 CFR 1910.215(a)(4)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01011C
29 CFR 1910.215(b)(9)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01012
29 CFR 1910.242(b)View full regulation text on OSHA.gov
Initial$5,844
Current$2,922reduced by $2,922
Seriousgravity 5
Citation #01013
29 CFR 1910.303(b)(2)View full regulation text on OSHA.gov
Initial$5,844
Current$2,922reduced by $2,922
Seriousgravity 5
Citation #01014A
29 CFR 1910.305(b)(2)(i)View full regulation text on OSHA.gov
Initial$5,844
Current$2,922reduced by $2,922
Repeatgravity 5
Citation #02001
29 CFR 1910.134(e)(1)View full regulation text on OSHA.gov
Initial$17,189
Current$8,595reduced by $8,594

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 346624125 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Dsm Metal Fabrication

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 346624125 directly: