Skip to main content
Inspection outcome
Opened: March 5, 2021 · Closed: January 30, 2026
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Planned (Programmed) · Partial — limited to specific operations or areas

Violations12
Serious+0
Initial penalty$59,293
Current penalty$59,293
Accidents0
Duration1792d
Summary

What happened in this inspection

On March 5, 2021, OSHA opened Wd Masonry, Llc’s inspection #345180665 at GONZALES, Louisiana — an establishment in the masonry contractors industry. The case was administratively closed on January 30, 2026, 1792 days after opening.

OSHA cited the employer for 12 violations totaling $59,293 in current penalties. All citations were Other-than-serious.

Breakdown by classification
12violations total
Repeat217%

A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.

Serious1083%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

12citations issued
$59,293current penalty
Look up on OSHA.gov
Seriousgravity 10
Citation #01001A
29 CFR 1926.451(b)(1)(i)View full regulation text on OSHA.gov
Initial$5,461
Current$5,461
Seriousgravity 10
Citation #01001B
29 CFR 1926.451(b)(7)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01001C
29 CFR 1926.451(c)(3)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01002A
29 CFR 1926.451(f)(3)View full regulation text on OSHA.gov
Initial$5,461
Current$5,461
Seriousgravity 10
Citation #01002B
29 CFR 1926.451(f)(7)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01003
29 CFR 1926.451(h)(1)View full regulation text on OSHA.gov
Initial$5,461
Current$5,461
Seriousgravity 5
Citation #01004
29 CFR 1926.453(b)(2)(v)View full regulation text on OSHA.gov
Initial$3,901
Current$3,901
Seriousgravity 10
Citation #01005A
29 CFR 1926.454(a)View full regulation text on OSHA.gov
Initial$5,461
Current$5,461
Seriousgravity 10
Citation #01005B
29 CFR 1926.454(b)View full regulation text on OSHA.gov
Initial$0
Current$0
Repeatgravity 5
Citation #02001
29 CFR 1926.102(a)(1)View full regulation text on OSHA.gov
Initial$6,242
Current$6,242
Repeatgravity 10
Citation #02002
29 CFR 1926.451(e)(1)View full regulation text on OSHA.gov
Initial$27,306
Current$27,306

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 345180665 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Wd Masonry, Llc

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 345180665 directly: