Skip to main content
Inspection outcome
Opened: November 10, 2020 · Closed: March 21, 2023
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Planned (Programmed) · Partial — limited to specific operations or areas

Violations12
Serious+0
Initial penalty$33,546
Current penalty$6,476
Accidents0
Duration861d
Summary

What happened in this inspection

On November 10, 2020, OSHA opened Custom Sheet And Steel Fabricators Inc.’s inspection #345017867 at COUNCIL GROVE, Kansas. The case was administratively closed on March 21, 2023, 861 days after opening.

OSHA cited the employer for 12 violations totaling $6,476 in current penalties — reduced from an initial proposed total of $33,546. All citations were Other-than-serious.

Breakdown by classification
12violations total
Serious1192%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious18%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

12citations issued
$6,476current penalty
↓ $27,070total reduction
Look up on OSHA.gov
Seriousgravity 1
Citation #01001
29 CFR 1910.157(c)(1)View full regulation text on OSHA.gov
Initial$2,340
Current$0reduced by $2,340
Seriousgravity 5
Citation #01002
29 CFR 1910.178(l)(1)(i)View full regulation text on OSHA.gov
Initial$3,901
Current$0reduced by $3,901
Seriousgravity 5
Citation #01003
29 CFR 1910.178(l)(4)(iii)View full regulation text on OSHA.gov
Initial$3,121
Current$2,185reduced by $936
Seriousgravity 5
Citation #01004
29 CFR 1910.178(q)(1)View full regulation text on OSHA.gov
Initial$4,681
Current$0reduced by $4,681
Seriousgravity 5
Citation #01005
29 CFR 1910.179(j)(1)(ii)View full regulation text on OSHA.gov
Initial$4,681
Current$2,575reduced by $2,106
Seriousgravity 1
Citation #01006A
29 CFR 1910.184(e)(1)View full regulation text on OSHA.gov
Initial$2,340
Current$0reduced by $2,340
Seriousgravity 5
Citation #01007
29 CFR 1910.212(a)(3)(ii)View full regulation text on OSHA.gov
Initial$3,901
Current$0reduced by $3,901
Seriousgravity 1
Citation #01008
29 CFR 1910.212(b)View full regulation text on OSHA.gov
Initial$2,340
Current$0reduced by $2,340
Seriousgravity 1
Citation #01009
29 CFR 1910.242(b)View full regulation text on OSHA.gov
Initial$2,340
Current$1,287reduced by $1,053
Seriousgravity 5
Citation #01010
29 CFR 1910.253(b)(2)(ii)View full regulation text on OSHA.gov
Initial$3,121
Current$0reduced by $3,121
Other
Citation #02001
29 CFR 1904.32(a)(2)View full regulation text on OSHA.gov
Initial$780
Current$429reduced by $351

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 345017867 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Custom Sheet And Steel Fabricators Inc.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 345017867 directly: