Skip to main content
Inspection outcome
Opened: October 17, 2019 · Closed: November 29, 2022
Serious citation issued

OSHA cited the employer for at least one Serious violation.

Safety inspection · Referral · Partial — limited to specific operations or areas

Violations7
Serious+7
Initial penalty$2,700
Current penalty$1,422
Accidents0
Duration1139d
Summary

What happened in this inspection

On October 17, 2019, OSHA opened 110435 - Antunez Carpentry Llc’s inspection #344390505 at GREENWOOD, Indiana — an establishment in the framing contractors industry. The case was administratively closed on November 29, 2022, 1139 days after opening.

OSHA cited the employer for 7 violations totaling $1,422 in current penalties — reduced from an initial proposed total of $2,700. Of those, 7 were classified as Serious or worse.

Breakdown by classification
7violations total
Serious7100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

7citations issued
$1,422current penalty
↓ $1,278total reduction
Look up on OSHA.gov
Serious
Citation #01001
29 CFR 1926.20(b)(1)View full regulation text on OSHA.gov
Initial$600
Current$225reduced by $375
Serious
Citation #01002
29 CFR 1926.95(a)View full regulation text on OSHA.gov
Initial$450
Current$225reduced by $225
Serious
Citation #01003
29 CFR 1926.501(b)(1)View full regulation text on OSHA.gov
Initial$600
Current$522reduced by $78
Serious
Citation #01004A
29 CFR 1926.503(a)(1)View full regulation text on OSHA.gov
Initial$600
Current$225reduced by $375
Serious
Citation #01004B
29 CFR 1926.1060(a)View full regulation text on OSHA.gov
Initial$0
Current$0
Serious
Citation #01005A
29 CFR 1926.1053(b)(13)View full regulation text on OSHA.gov
Initial$450
Current$225reduced by $225

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 344390505 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Referral — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 344390505 directly: