Skip to main content
Inspection outcome
Opened: January 6, 2020 · Closed: July 14, 2021
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Planned (Programmed) · Partial — limited to specific operations or areas

Violations6
Serious+0
Initial penalty$36,895
Current penalty$17,494
Accidents0
Duration555d
Summary

What happened in this inspection

On January 6, 2020, OSHA opened Universal Masonry Construction, Inc.’s inspection #344539994 at HINSDALE, Illinois — an establishment in the masonry contractors industry. The case was administratively closed on July 14, 2021, 555 days after opening.

OSHA cited the employer for 6 violations totaling $17,494 in current penalties — reduced from an initial proposed total of $36,895. All citations were Other-than-serious.

Breakdown by classification
6violations total
Repeat233%

A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.

Serious350%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious117%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

6citations issued
$17,494current penalty
↓ $19,401total reduction
Look up on OSHA.gov
Seriousgravity 1
Citation #01003
29 CFR 1926.102(a)(1)View full regulation text on OSHA.gov
Initial$1,908
Current$954reduced by $954
Seriousgravity 5
Citation #01004
29 CFR 1926.451(f)(4)View full regulation text on OSHA.gov
Initial$3,181
Current$1,591reduced by $1,590
Repeatgravity 5
Citation #02001
29 CFR 1926.451(b)(1)View full regulation text on OSHA.gov
Initial$5,089
Current$2,544reduced by $2,545
Repeatgravity 10
Citation #02002
29 CFR 1926.451(g)(1)View full regulation text on OSHA.gov
Initial$22,265
Current$11,133reduced by $11,132
Seriousgravity 5
Citation #01001
29 CFR 1910.178(l)(1)(i)View full regulation text on OSHA.gov
Initial$2,544
Current$1,272reduced by $1,272
Other
Citation #01002
29 CFR 1910.1200(e)(1)View full regulation text on OSHA.gov
Initial$1,908
Current$0reduced by $1,908

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 344539994 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Universal Masonry Construction, Inc.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 344539994 directly: