Skip to main content
Inspection outcome
Opened: February 21, 2023 · Closed: March 23, 2026
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Unprogrammed Other · Comprehensive — entire establishment

Violations10
Serious+0
Initial penalty$31,477
Current penalty$31,477
Accidents0
Duration1126d
Summary

What happened in this inspection

On February 21, 2023, OSHA opened Lauries General Welding, Inc’s inspection #346519440 at MEDLEY, Florida. The case was administratively closed on March 23, 2026, 1126 days after opening.

OSHA cited the employer for 10 violations totaling $31,477 in current penalties. All citations were Other-than-serious.

Breakdown by classification
10violations total
Serious770%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious330%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

10citations issued
$31,477current penalty
Look up on OSHA.gov
Seriousgravity 10
Citation #01001
29 CFR 1910.252(a)(1)(i)View full regulation text on OSHA.gov
Initial$4,688
Current$4,688
Seriousgravity 10
Citation #01004
29 CFR 1910.252(a)(3)(i)View full regulation text on OSHA.gov
Initial$4,688
Current$4,688
Seriousgravity 10
Citation #01006
29 CFR 1910.254(a)(3)View full regulation text on OSHA.gov
Initial$4,688
Current$4,688
Seriousgravity 5
Citation #01007
29 CFR 1910.178(l)(6)View full regulation text on OSHA.gov
Initial$3,349
Current$3,349

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 346519440 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Unprogrammed Other — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 346519440 directly: