Skip to main content
Inspection outcome
Opened: July 11, 2023 · Closed: December 27, 2023
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Complaint · Partial — limited to specific operations or areas

Violations5
Serious+0
Initial penalty$33,394
Current penalty$13,572
Accidents0
Duration169d
Summary

What happened in this inspection

On July 11, 2023, OSHA opened Seminole Machine And Welding Inc.’s inspection #346821259 at LARGO, Florida — an establishment in the structural steel & precast concrete contractors industry. The case was administratively closed on December 27, 2023, 169 days after opening.

OSHA cited the employer for 5 violations totaling $13,572 in current penalties — reduced from an initial proposed total of $33,394. All citations were Other-than-serious.

Breakdown by classification
5violations total
Repeat120%

A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.

Serious480%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

5citations issued
$13,572current penalty
↓ $19,822total reduction
Look up on OSHA.gov
Seriousgravity 10
Citation #01001
5A0001General Duty Clause or unstructured citation
Initial$6,250
Current$5,000reduced by $1,250
Seriousgravity 5
Citation #01002
29 CFR 1910.212(a)(1)View full regulation text on OSHA.gov
Initial$5,358
Current$4,286reduced by $1,072
Seriousgravity 5
Citation #01003
29 CFR 1926.403(h)View full regulation text on OSHA.gov
Initial$5,358
Current$4,286reduced by $1,072
Seriousgravity 1
Citation #01004
29 CFR 1910.1200(f)(6)(ii)View full regulation text on OSHA.gov
Initial$2,678
Current$0reduced by $2,678
Repeatgravity 10
Citation #02001
29 CFR 1910.178(l)(6)View full regulation text on OSHA.gov
Initial$13,750
Current$0reduced by $13,750

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 346821259 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Seminole Machine And Welding Inc.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Complaint — an inspection triggered by a worker complaint.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 346821259 directly: