Skip to main content
Inspection outcome
Opened: June 5, 2025 · Closed: September 24, 2025
Serious citation issued

OSHA cited the employer for at least one Serious violation.

Safety inspection · Planned (Programmed) · Partial — limited to specific operations or areas

Violations1
Serious+1
Initial penalty$3,310
Current penalty$3,310
Accidents0
Duration111d
Summary

What happened in this inspection

On June 5, 2025, OSHA opened Trinity Fabricators, Inc.’s inspection #348289869 at GREEN COVE SPRINGS, Florida. The case was administratively closed on September 24, 2025, 111 days after opening.

OSHA cited the employer for 1 violation totaling $3,310 in current penalties. Of those, 1 was classified as Serious or worse.

Breakdown by classification
1violation total
Repeat1100%

A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.

Citations

Citations issued in this inspection

1citations issued
$3,310current penalty
Look up on OSHA.gov

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 348289869 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Trinity Fabricators, Inc.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 348289869 directly: