Skip to main content
Inspection outcome
Opened: July 22, 2020 · Closed: April 24, 2023
Accident-triggered

OSHA opened this case in response to a reported workplace incident.

Safety inspection · Accident-related · Partial — limited to specific operations or areas

Violations12
Serious+0
Initial penalty$20,220
Current penalty$15,560
Accidents0
Duration1006d
Summary

What happened in this inspection

On July 22, 2020, OSHA opened United Metal Concepts, Inc.’s inspection #344843701 at POWAY, California — an establishment in the structural steel & precast concrete contractors industry. The case was administratively closed on April 24, 2023, 1006 days after opening.

OSHA cited the employer for 12 violations totaling $15,560 in current penalties — reduced from an initial proposed total of $20,220. All citations were Other-than-serious.

Breakdown by classification
12violations total
Serious18%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious1192%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

12citations issued
$15,560current penalty
↓ $4,660total reduction
Look up on OSHA.gov
Other
Citation #01001
342(A)General Duty Clause or unstructured citation
Initial$5,000
Current$1,500reduced by $3,500
Other
Citation #01002
3203(B)General Duty Clause or unstructured citation
Initial$225
Current$150reduced by $75
Other
Citation #01003
29 CFR 4300.29(a)View full regulation text on OSHA.gov
Initial$225
Current$150reduced by $75
Othergravity 5
Citation #01004
1509(A)General Duty Clause or unstructured citation
Initial$335
Current$110reduced by $225
Othergravity 5
Citation #01005
1509(B)General Duty Clause or unstructured citation
Initial$250
Current$80reduced by $170
Othergravity 5
Citation #01006
1512(B)General Duty Clause or unstructured citation
Initial$250
Current$165reduced by $85
Othergravity 1
Citation #01007
1512(I)General Duty Clause or unstructured citation
Initial$165
Current$110reduced by $55
Othergravity 1
Citation #01008
1527(A)(1)(F)General Duty Clause or unstructured citation
Initial$165
Current$110reduced by $55
Othergravity 5
Citation #01009
3395(I)General Duty Clause or unstructured citation
Initial$335
Current$225reduced by $110
Othergravity 5
Citation #01010
3668(A)(2)General Duty Clause or unstructured citation
Initial$420
Current$280reduced by $140
Othergravity 5
Citation #01011
3668(F)General Duty Clause or unstructured citation
Initial$250
Current$80reduced by $170
Seriousgravity 10
Citation #02001
1592(E)General Duty Clause or unstructured citation
Initial$12,600
Current$12,600

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 344843701 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Accident-related — an inspection triggered by a reported workplace accident.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 344843701 directly: