Skip to main content
Inspection outcome
Opened: August 17, 2022 · Closed: April 26, 2023
Accident-triggered

OSHA opened this case in response to a reported workplace incident.

Safety inspection · Accident-related · Partial — limited to specific operations or areas

Violations5
Serious+0
Initial penalty$1,185
Current penalty$935
Accidents0
Duration252d
Summary

What happened in this inspection

On August 17, 2022, OSHA opened Midstate Sheetmetal, Inc.’s inspection #346155245 at MC FARLAND, California — an establishment in the roofing contractors industry. The case was administratively closed on April 26, 2023, 252 days after opening.

OSHA cited the employer for 5 violations totaling $935 in current penalties — reduced from an initial proposed total of $1,185. All citations were Other-than-serious.

Breakdown by classification
5violations total
Other-than-serious5100%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

5citations issued
$935current penalty
↓ $250total reduction
Look up on OSHA.gov
Othergravity 10
Citation #01005
3276(F)General Duty Clause or unstructured citation
Initial$375
Current$185reduced by $190
Other
Citation #01002
3364(A)General Duty Clause or unstructured citation
Initial$250
Current$250
Othergravity 1
Citation #01003
1511(B)General Duty Clause or unstructured citation
Initial$125
Current$125
Othergravity 5
Citation #01004
29 CFR 2473.2(a)View full regulation text on OSHA.gov
Initial$185
Current$125reduced by $60
Other
Citation #01001
461(A)General Duty Clause or unstructured citation
Initial$250
Current$250

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 346155245 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Midstate Sheetmetal, Inc.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Accident-related — an inspection triggered by a reported workplace accident.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 346155245 directly: