Skip to main content
Inspection outcome
Opened: March 22, 2023 · Closed: December 27, 2023
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations14
Serious+0
Initial penalty$5,960
Current penalty$3,275
Accidents0
Duration280d
Summary

What happened in this inspection

On March 22, 2023, OSHA opened Frontier-kemper Constructors, Inc. And Tutor Perini Corporation’s inspection #346587090 at LOS ANGELES, California. The case was administratively closed on December 27, 2023, 280 days after opening.

OSHA cited the employer for 14 violations totaling $3,275 in current penalties — reduced from an initial proposed total of $5,960. All citations were Other-than-serious.

Breakdown by classification
14violations total
Other-than-serious14100%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

14citations issued
$3,275current penalty
↓ $2,685total reduction
Look up on OSHA.gov
Other
Citation #01001
8406(A)General Duty Clause or unstructured citation
Initial$425
Current$425
Othergravity 5
Citation #01002
1593(D)General Duty Clause or unstructured citation
Initial$795
Current$795
Othergravity 5
Citation #01003
1597(A)General Duty Clause or unstructured citation
Initial$475
Current$0reduced by $475
Othergravity 5
Citation #01004
1597(D)General Duty Clause or unstructured citation
Initial$315
Current$0reduced by $315
Othergravity 5
Citation #01005
1620(A)General Duty Clause or unstructured citation
Initial$315
Current$0reduced by $315
Othergravity 5
Citation #01006
1621(A)General Duty Clause or unstructured citation
Initial$315
Current$315
Othergravity 5
Citation #01007
1632(C)General Duty Clause or unstructured citation
Initial$315
Current$0reduced by $315
Othergravity 5
Citation #01011
3314(I)General Duty Clause or unstructured citation
Initial$475
Current$0reduced by $475
Othergravity 5
Citation #01008
3314(E)General Duty Clause or unstructured citation
Initial$475
Current$475
Othergravity 5
Citation #01009
3314(G)General Duty Clause or unstructured citation
Initial$475
Current$475
Othergravity 5
Citation #01010
3314(H)General Duty Clause or unstructured citation
Initial$475
Current$0reduced by $475
Othergravity 5
Citation #01012
3314(J)General Duty Clause or unstructured citation
Initial$475
Current$475
Othergravity 5
Citation #01013
6151(C)(4)General Duty Clause or unstructured citation
Initial$315
Current$315
Othergravity 5
Citation #01014
8483(A)General Duty Clause or unstructured citation
Initial$315
Current$0reduced by $315

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 346587090 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Frontier-kemper Constructors, Inc. And Tutor Perini Corporation

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 346587090 directly: