Skip to main content
Inspection outcome
Opened: December 8, 2021 · Closed: July 12, 2022
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Complaint · Partial — limited to specific operations or areas

Violations6
Serious+0
Initial penalty$3,290
Current penalty$3,290
Accidents0
Duration216d
Summary

What happened in this inspection

On December 8, 2021, OSHA opened Crown Precision’s inspection #345709810 at IRWINDALE, California — an establishment in the machine shops industry. The case was administratively closed on July 12, 2022, 216 days after opening.

OSHA cited the employer for 6 violations totaling $3,290 in current penalties. All citations were Other-than-serious.

Breakdown by classification
6violations total
Other-than-serious6100%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

6citations issued
$3,290current penalty
Look up on OSHA.gov
Other
Citation #01001
461(A)General Duty Clause or unstructured citation
Initial$275
Current$275
Other
Citation #01002
29 CFR 4300.40(a)View full regulation text on OSHA.gov
Initial$275
Current$275
Othergravity 10
Citation #01003
3203(A)General Duty Clause or unstructured citation
Initial$685
Current$685
Othergravity 10
Citation #01004
3205(C)General Duty Clause or unstructured citation
Initial$685
Current$685
Othergravity 10
Citation #01005
3650(T)(7)General Duty Clause or unstructured citation
Initial$685
Current$685
Othergravity 10
Citation #01006
3668(F)General Duty Clause or unstructured citation
Initial$685
Current$685

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 345709810 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Crown Precision

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Complaint — an inspection triggered by a worker complaint.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 345709810 directly: