Skip to main content
Inspection outcome
Opened: March 27, 2019 · Closed: August 19, 2019
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Programmed Related · Partial — limited to specific operations or areas

Violations3
Serious+0
Initial penalty$4,495
Current penalty$4,495
Accidents0
Duration145d
Summary

What happened in this inspection

On March 27, 2019, OSHA opened Golden State Construction And Framing Inc.’s inspection #343891594 at DALY CITY, California — an establishment in the framing contractors industry. The case was administratively closed on August 19, 2019, 145 days after opening.

OSHA cited the employer for 3 violations totaling $4,495 in current penalties. All citations were Other-than-serious.

Breakdown by classification
3violations total
Repeat133%

A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.

Other-than-serious267%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

3citations issued
$4,495current penalty
Look up on OSHA.gov
Other
Citation #01001
341(C)(2)(A)General Duty Clause or unstructured citation
Initial$935
Current$935
Othergravity 5
Citation #01002
3276(E)(15)(B)General Duty Clause or unstructured citation
Initial$560
Current$560
Repeatgravity 5
Citation #01003
1712(C)(1)General Duty Clause or unstructured citation
Initial$3,000
Current$3,000

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 343891594 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Programmed Related — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 343891594 directly: