Skip to main content
Inspection outcome
Opened: October 27, 2020 · Closed: February 22, 2024
Major citations

OSHA issued serious-tier citations with significant penalties.

Safety inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations9
Serious+1
Initial penalty$39,035
Current penalty$21,035
Accidents0
Duration1213d
Summary

What happened in this inspection

On October 27, 2020, OSHA opened Ameripec Inc.’s inspection #344997903 at BUENA PARK, California. The case was administratively closed on February 22, 2024, 1213 days after opening.

OSHA cited the employer for 9 violations totaling $21,035 in current penalties — reduced from an initial proposed total of $39,035. Of those, 1 was classified as Serious or worse.

Breakdown by classification
9violations total
Repeat222%

A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.

Serious444%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious333%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

9citations issued
$21,035current penalty
↓ $18,000total reduction
Look up on OSHA.gov
Other
Citation #01001
29 CFR 4300.10(a)View full regulation text on OSHA.gov
Initial$425
Current$425
Other
Citation #01002
29 CFR 4300.29(a)View full regulation text on OSHA.gov
Initial$425
Current$425
Othergravity 5
Citation #01003
5097(A)General Duty Clause or unstructured citation
Initial$475
Current$475
Seriousgravity 10
Citation #02001
3212(A)(2)(A)General Duty Clause or unstructured citation
Initial$3,825
Current$3,825
Seriousgravity 10
Citation #03001
3212(E)General Duty Clause or unstructured citation
Initial$7,650
Current$5,735reduced by $1,915
Seriousgravity 10
Citation #04001
5162(A)General Duty Clause or unstructured citation
Initial$5,735
Current$3,825reduced by $1,910
Repeat
Citation #05001
5157(C)(2)General Duty Clause or unstructured citation
Initial$1,000
Current$1,000
Repeatgravity 5
Citation #06001
3328(D)General Duty Clause or unstructured citation
Initial$1,500
Current$1,500
Seriousgravity 10
Citation #07001
4650(E)General Duty Clause or unstructured citation
Initial$18,000
Current$3,825reduced by $14,175

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 344997903 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Ameripec Inc.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 344997903 directly: