Skip to main content
Inspection outcome
Opened: June 17, 2025 · Closed: January 14, 2026
Citations issued

OSHA issued one or more Other-than-serious citations.

Health inspection · Referral · Comprehensive — entire establishment

Violations18
Serious+0
Initial penalty$9,045
Current penalty$5,427
Accidents0
Duration211d
Summary

What happened in this inspection

On June 17, 2025, OSHA opened Gmq Tops Mobile Llp’s inspection #348318130 at MOBILE, Alabama. The case was administratively closed on January 14, 2026, 211 days after opening.

OSHA cited the employer for 18 violations totaling $5,427 in current penalties — reduced from an initial proposed total of $9,045. All citations were Other-than-serious.

Breakdown by classification
18violations total
Serious1478%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious422%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

18citations issued
$5,427current penalty
↓ $3,618total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01001
29 CFR 1910.95(c)(1)View full regulation text on OSHA.gov
Initial$3,618
Current$2,171reduced by $1,447
Seriousgravity 5
Citation #01002A
29 CFR 1910.134(c)View full regulation text on OSHA.gov
Initial$2,412
Current$1,447reduced by $965
Seriousgravity 5
Citation #01002B
29 CFR 1910.134(e)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01002C
29 CFR 1910.134(f)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01002E
29 CFR 1910.134(k)(3)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01003A
29 CFR 1910.1053(c)View full regulation text on OSHA.gov
Initial$3,015
Current$1,809reduced by $1,206
Seriousgravity 5
Citation #01003B
29 CFR 1910.1053(d)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01003C
29 CFR 1910.1053(e)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01003E
29 CFR 1910.1053(g)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01003G
29 CFR 1910.1053(j)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01003H
29 CFR 1910.1053(j)(2)View full regulation text on OSHA.gov
Initial$0
Current$0

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 348318130 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Gmq Tops Mobile Llp

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Referral — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 348318130 directly: