Skip to main content
Inspection outcome
Opened: February 26, 2025 · Closed: July 31, 2025
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations1
Serious+0
Initial penalty$8,038
Current penalty$4,823
Accidents0
Duration155d
Summary

What happened in this inspection

On February 26, 2025, OSHA opened Century Fasteners Corp’s inspection #348067810 at MOBILE, Alabama — an establishment in the general warehousing & storage industry. The case was administratively closed on July 31, 2025, 155 days after opening.

OSHA cited the employer for 1 violation totaling $4,823 in current penalties — reduced from an initial proposed total of $8,038. All citations were Other-than-serious.

Breakdown by classification
1violation total
Serious1100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

1citations issued
$4,823current penalty
↓ $3,215total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01001
5A0001General Duty Clause or unstructured citation
Initial$8,038
Current$4,823reduced by $3,215

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 348067810 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Century Fasteners Corp

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 348067810 directly: