Skip to main content
Inspection outcome
Opened: April 19, 2021 · Closed: December 6, 2021
Citations issued

OSHA issued one or more Other-than-serious citations.

Health inspection · Complaint · Partial — limited to specific operations or areas

Violations10
Serious+0
Initial penalty$0
Current penalty$0
Accidents0
Duration231d
Summary

What happened in this inspection

On April 19, 2021, OSHA opened Island Glass Works’s inspection #345257869 at ELBERTA, Alabama. The case was administratively closed on December 6, 2021, 231 days after opening.

OSHA cited the employer for 10 violations totaling $0 in current penalties. All citations were Other-than-serious.

Breakdown by classification
10violations total
Other-than-serious10100%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

10citations issued
$0current penalty
Look up on OSHA.gov

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 345257869 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Complaint — an inspection triggered by a worker complaint.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 345257869 directly: